![]() Both are included in the Evolis #A5021 UltraClean printer cleaning kit. Clean the card intake roller with alcohol wipes and/or an IPA alcohol cleaning card.For example, if the cards are 30 mils thick, adjust approximately 32 or 33 mils. Check the card thickness gauge and set just slightly more than your blank cards’ thickness.Remove the cards from the input hopper and fan out or shuffle them to break any static-bond, and to dissipate natural static charge. ![]() The presence of any of these contaminants can result in poor print-quality. This will prevent the transfer of lint, dust, and residual body-oils from your fingertips. Card Feed Problems – Remedies:īefore attempting remedies, remember to handle blank plastic cards carefully, and only by their edges. Rather, the problem most often is the result of the cards being difficult to separate. Usually, the cause is not with the printer itself. But it is more common when their card hoppers are full. This can occur when there are just a few cards in the hopper. Plastic card printers may have instances when they will not feed cards consistently from their card input hoppers. Some of the remedies may also apply to other Evolis printers, and those from other manufacturers. This tech-tip is intended to help resolve card feed problems with Evolis Tattoo2, Evolis Pebble4 and Evolis Dualys3 plastic card printers.
0 Comments
Leave a Reply. |